DuraSeal Vent & Trim Finish Semi-Gloss Spray 11.5 oz

DuraSeal Vent & Trim Finish Spray (gloss sheen) is a self-leveling transparent, tough finish formulated to repair wood floor finishes. It is available in gloss, semi-gloss and satin. This product contains no CFC's.

see DuraSeal Vent & Trim Finish technical data sheet
manufacturer part# 83305000
packaging: 11.5 oz metal can

Precaution
Do not use over shellac, lacquer or stains containing wax or stearates.

Surface Preparation
• Sand old, worn, or damaged area until surface is dull. Be sure to feather edge the sanding to avoid lap-marks.
• Remove all dust with a cloth dampened with mineral spirits and allow to dry.

Application
• Shake can vigorously for one minute after pellets are loose in can.
• Hold can vertically approximately 12 inches from surface.
• Move can evenly across surface with slightly overlapping strokes. NOTE: Apply in thin uniform coats.
• Let dry at least 12 hours before subjecting to traffic.

Clean-Up
Mineral Spirits

Storage
CONTENTS UNDER PRESSURE. Avoid prolonged exposure to sunlight or heat from other sources that may cause bursting. Do not store above 1200F.