Rubio Monocoat Raw Wood Cleaner 1 Liter

Rubio Monocoat Raw Wood Cleaner is used as a cleaner for raw wood surfaces before the application of Rubio Monocoat Oil Plus 2C. It also removes the natural oils from the surface of exotic wood species preventing a blotchy finish. This product can also be used to clean the materials that were used during the application. Raw Wood Cleaner does not open the wood grain. There is no need to saturate the wood, tack the floor overall and use more product only on soiled areas.

see Rubio Monocoat Raw Wood Cleaner product data sheet

Instructions:
- Sand and vacuum the surface in the appropriate manner.
- Dampen a hand towel with Monocoat Raw Wood Cleaner.
- Clean/Tack a section of the wood. Add more cleaner as needed and continue the process. Replace or clean the towel as it becomes soiled.
- When finished allow the wood to dry until it regains its original color. Drying time: 15 minutes to 1 hour, depending on the degree of product that has been used to wet the surface.

Technical Specifications:
- Physical state at 68 °F: liquid.
- Color: clear.
- Final boiling point: 515 °C
- Density [kg/m3]: 0,7 (59 °C)
- Viscosity: 1,67 mm2/s (77°C)
- Solubility in water: < 0,10 %
- Flash point: > 143 °F

Consumption: +/- 750 sq. ft. / liter

Package: 1 liter can