Rubio Monocoat Universal Maintenance Oil 0.5 Liters

Rubio Monocoat Universal Maintenance Oil (UMO) is used for protecting and refreshing the color of oiled wooden surfaces. This treatment restores and intensifies both the color and the durability of the finish. Intervals for maintaining the floor vary depending on the amount of wear. It is recommended that this treatment be carried out just as the protective oil shows signs of fading. Rubio Monocoat UMO when used to recoat a Rubio Monocoat oiled floor adds a soft satin luster to the surface. UMO can be applied to Monocoat oiled floors 36 hours after the initial oil application or anytime thereafter. Pure UMO is suggested for all Monocoat floors.

color: Pure
see Rubio Monocoat Universal Maintenance Oil product data sheet

Instructions:
- Eliminate dirt and dust from the floor.
- Clean the floor thoroughly with a RM Natural Soap and water mixture. Rinse well with water to eliminate any soap residues. Leave it to dry completely.
- Work in sections that can be wiped/polished dry in 5 minutes.
- Manual application - Apply the oil with a cloth, brush or sponge.
- Mechanical application - Apply the oil with a buffer and a white pad. Work in sections of 40 to 50 s.f. Use very little product to prevent the floor from becoming sticky.
- After a 5-minute reaction period, wipe the surface dry with a paper towel or cotton cloth. With a buffer application polish dry with a white pad & cloth immediately after each section is oiled.
- Ensure the room is well ventilated. The floor should be dry after 6 - 8 hours.

Technical Specifications:
- Physical state at 68 °F: liquid.
- Color: clear.
- Final boiling point: 515 °C
- Density [kg/m3]: 0,7 (59 °C)
- Viscosity: 1,67 mm2/s (77°C)
- Solubility in water: < 0,10 %
- Flash point: > 143 °F

Coverage:
0.5 liter = 750 – 1,000 sq. ft. (depending on wear)
These usages are indicative. Results depend on wood type and method of preparation.

Package: 0.5 liters can